DIGITAL POINT FUSION APPARATUS

MODEL NO. SSE-935
 
With a resolution of 0.1 ° C to measure the melting point of solid and liquid samples. Boiling point / boiling point. Temperature 0-300 ° C with 4-digit LED display.
 
ADVANTAGE:

• very useful for the Pharmaceutical Industry.
• Highly accurate and easy to operate.
• 4 digit seven segment red LED display.
• Digital Temperature Reading (0.1 C in the SI-935 model).
• silicone oil bath and a built-in magnetic stirrer for even heating.
• Free illuminating glare and large magnifying glass for spot free observations.

 
Melting point apparatus with 4 digit LED display is designed for accurate melting point measurement and to check the melting range of solid samples. The apparatus consists of a silicon oil bath of about 200 ml capacity, covered with a 5-hole Teflon cap, equipped with a special type of oil-immersion heater and having three holes for holding the capillaries. , one for the point tube and one boiling for the thermometer.
 
The apparatus consists of a built-in magnetic stirrer, an electronic controller with an indicator to precisely adjust the heating speed of the silicone oil bath, an ON / OFF switch, a pilot lamp, a magnifying glass, glare-free background illuminator and a High / Low range temperature selector switch and digital display of temperature with PT-100 RTD sensor.
 
The "Start" switch is used to start the melting point measurement. The user can stop the measurement with the "Stop" switch after the instrument reaches the melting point of the sample. The display will always show the last temperature where the 'Stop' switch was pressed in the last measurement. Clear switch is used to clear the screen to zero.
 
TECHNICAL DATA:

TEMPERATURE: ° C: 0-300 C on a 4-digit LED display.
RESOLUTION: 0.1 ° C in the IS-935 model.
CAPILARY GLASS TUBE: 12mm long, 0.8-1.1mm internal diameter.
SAMPLE QUANTITY: Suitably dry fine powder at a temperature well below its melting point, 4 to 6 mm high.
OIL-BATH: glass silicone oil bath - 200 ml capacity with Teflon lid equipped with oil immersion heater. It is to have three holes for holding the capillaries, one for the boiling point tube and one for thermometer.
Stirring speed: Controllable with front knob
POWER SUPPLY: 230V ± 10% AC, 50 Hz
DIMENSION: 315 x 290 x 230mm (LxBxH) (approx.)
WEIGHT: 12 Kg. (Approx.)
 
ACCESSORIES:

• Capillary Box
• Glass tubes for liquid sample (6 x 75 mm) - 2Nos.
• Magnetic capsule
• Bottle of silicone oil - 250 ml
• Glass Cylindrical glass with Teflon covers equipped with immersion heater
• Manual.
• Dust cover. ?