Helpline No.: +91-9971882305

Contact Us
Mr. Saurav
C-238, Yamuna Vihar, Delhi-110053, India
Mobile : +91-9971882305
Peel/ Bond Strength Tester Digital Model With Test Facility Of Peel,
Tensile strength and elongation are the two prime characteristics of most of the raw materials, whether they are metals: or non-metals: such as rubber, textiles, plastic, paper or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.

The PEEL/BOND STRENGTH TESTER provides a relatively inexpensive way for determining the Peel & Adhesion of sample. They are based on constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, while the other end is made to move at a known fixed speed with the help of motor, gearbox and screw arrangement. The load exerted on the stationary grip is sensed by a load cell and indicated by a digital load indicator. The controller is microprocessor based and has the facility of over load protection, peak hold and auto calibration. The load directly indicated in kilograms or Newton.

The elongation of the test specimen is measured on a digital indicator fixed on the frame of the tester, which indicates the distance between the grips.
Various built in safety arrangements such as over travel protection are provided.

The tester is finished in metallic painting and bright chrome| zinc plating to give the apparatus a corrosion resistant finish. It is supplied complied which electrical
Which include micro-, switches, Push buttons, and contactors for safe and convenient operation

Technical Data:

Load Capacity: 0-20kg
Resolution: 1.0 g
Load Indicator: Microprocessor based indicator with memory facility of peak load
Clear distance between two plates: 250mm
Grips: A pair of hard chrome plated grips
Paint: Powder coated
Power requirement: Single phase 230V / 50Hz